With The
New Etch-O-Matic Metal Marking KitsYou Can Permanently Mark Tools, Parts,
Instruments And Equipment With Your Names, Numbers, Designs Or Trademarks In
Your Shop In JustSeconds For Less
Than One Cent Per Mark
Here Is A Video Showing Etch-O-Matic Marking Tools!
Below Are Examples Of Permanent Metal Etching That You Can Easily Do In Your Own Shop! Simply
Create Your Own Copy, Designs Or Trademark On Your Computer And Put
The Marks On Your Tools,
PartsOr Equipment In Just Seconds! Marking
Is Easy, Quick, Inexpensive And Professional!
And You Can Do It!
SEE HOW
YOU CAN EASILY ETCH METAL TOOLS, PARTS, KNIVES PERMANENTLY IN SECONDS!
ETCH-O-MATIC will Etch into the
Surface
of Anything made of Metal, including Tools, Instruments, Equipment or
Metal Parts, anything that can be Typed or Photo
Processed on a Special Stencil. This includes Names, Numbers, Designs,
Trademarks. Using an Electro- Chemical
principle, the New ETCH-O-MATIC can Etch as Deep as .003" of an Inch in
Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost
Instantly. It marks any Flat or Round Metal Surface down to 1/16" Diameter
and any Metal Thickness from Thin Foil up to the Largest Castings easily.
Most Marks (which look like Printing or Engraving) take about 3 to 20
Seconds (the Longer Dwell Times are for
Deep Etching)and are Permanently Etched
into the Tool or Manufactured Part.
MAKES MARKS QUICKLY AND EASILY!
ETCH-O-MATIC is EASY TO USE. Anyone
can become an EXPERT in JUST MINUTES and produce Professional Looking
Marks In Seconds.
Etch-O-Matic is the Very Easiest MarkingSystem to Learn that is
Available Today!
Also, You will find that ETCH-O-MATIC is by Far the LEAST EXPENSIVE
method of Metal Marking on the Market Today. Your Marks will Cost Less
than a Cent
to Produce and You will be Pleased with the Result.
MARKING WITH GROUND PLATE — Simply Lay the Tool or Part
on the Ground Plate and Touch ETCH-O-MATIC to it for a Few Brief
Seconds and Your Mark is Permanently Etched Into the Surface.
MARKING ROUND SURFACES — Drill Bits, Milling Cutters,
Tubing, Pipe or nearly anything Round can be Easily Marked by
"Rolling" the Mark on as Shown Above.
MAKES DEEP ETCH MARKS— ETCH-O- MATIC Marks many Metals as
Deep as .003" with Deep Etch Adapter Clip, a Mark that can only be
Removed by Grinding a Major Part of the Surface Away.
BASICALLY, ETCH-O-MATIC and the Electro-Chemical Marking
System has been Proven Over and Over again during our 36 Years in
Business as the Best Way to Permanently Mark Anything Metal.
HOW TO USE A DURA-FILM STENCIL.
Here Is a Quick, Easy And
Inexpensive Way To Mark Metal Tools, Parts Or Knives.
Create Your Artwork On Your
Computer With Our New Ultra Violet Stencil-Makers.
(As Shown
Below).
Or You Can Use Our Regular Die Impressed Stencils Which Are Included In
Every Kit - Just Simply Type On Them.
Next Place The Stencil On Your Tool, Part Or Knife Blade,
and Use
a Small Piece Of Scotch Tape To Hold It In Position.
(NOTE: You Can
Put The Stencil Directly On The
Etch-O-Matic For Marking Metal, But This Method
Is Used For Exact Placement On An Item.)
When You are Ready Wet the Head of The Etch-O-Matic With
Electrolyte, and Place It On The Stencil. Touch The Blade With The Ground Wire (Shown With Alligator Clip)
For a Few Seconds and Your Mark Is Complete - it's just that simple!
The Mark Shown is Black On Stainless
Steel But You Can Also Make
Deep Etch Marks Down To About .003" and They Can Be "Clear" Or Black.
You Can See Just How Easy It Is To Put Your
Own Mark On
Anything Including Tools, Parts, Instruments Or Even Knives.
Permanently Marked...Here We Are Marking A
Saw Blade Since It Is Large Enough To Make A Good Photo.
You Simply Lay The Stencil On The Blade, Wet The Etch-O-Matic
Pad (On Bottom) With Electrolyte, Then Place The Etch-O-Matic
On The Stencil, Ground For A Few Seconds And Then Remove
And Your Blade Is Permanently Marked.
Sample Of Typewriter Stencil That Comes In Each Kit Shown Above. We Have Typed "SAMPLE MARK" To Show You How It Would Look.
TYPEWRITER STENCILS
In Each Etch-O-Matic
Kit There Is A FREE Package Of Stencils. They Are Prepared By Using A Typewriter Like The Sample Shown
on the Left. This Is Quick, Easy And Cheap, As You Can Do It Yourself If You Have
A Typewriter. The Marks Will Look Just Like You "Typed" In Black Letters On Your Parts.
You Can Make Your Own Dura-Film Stencils
(With The Purchase Of A UV Stencil Maker Shown Below)
As Shown Below Or Even Send Us Your Artwork And We Will Make Them For You. Contact Us By
email, Fax or Phone For This.
HOW
TO MAKE DURA-FILM STENCILS Now Make Dura-Film
Stencils In About 3 Minutes.
(NOTE: We Are Using Large Type So It Will Photograph Easily.)
Your Artwork...First Make Your Copy On Your
Computer. Here Is A Simple A B C Made Large To Show In
The Photo.You Can Make Any Line Drawing, Logo, Trademark
or Simple Message You Wish. There Is Not Much Limit
Except Photos Are Difficult And Very Thin Lines Are Hard
To Mark.
Transparency...Next Print Out Your Copy On A
Transparency (Which Comes In The Kit) And Place The
Transparency Copy On A Piece Of Unexposed Dura-Film
Stencil (Which Comes In The Kit) And Finally Place A
Glass Plate On Top.
U.V. Exposure Unit...Next Place Tray In The
440 Dura-Film Stencil Maker And Turn On Exposure Unit
For About Three Minutes.
Develop Your Stencil...Next Remove Stencil
And Develop For 30 Seconds To A Minute. Stencil Is Then
Ready To Use To Mark Your Knives Or Anything Metal.
Permanently Marked...Here We Are Marking A
Saw Blade Since It Is Large Enough To Make A Good Photo.
You Simply Lay The Stencil On The Blade, Wet The Etch-O-Matic
Pad (On Bottom) With Electrolyte, Then Place The Etch-O-Matic
On The Stencil, Ground For A Few Seconds And Then Remove
And Your Blade Is Permanently Marked.
ETCH-O-MATIC MAKES FOUR TYPES OF MARKS
Black Mark
Etch-O-Matic makes a Black Mark on almost any metal
Deep Mark
Etch-O-Matic makes a Clear Deep Etch on .003" on metals
Deep Black Mark
Etch-O-Matic makes a Deep Etch Black Mark on metal
Frosty Mark
Etch-O-Matic makes a Frosty Mark on mirrow finish metal
Here Are
The Most Popular Etch-O-Matic Kits
Combined BELOW With The New STENCIL MAKERS For
SPECIAL COMBO OFFERS YOU MUST SEE!
Etch-O-Matic Starter Kit
Lowest Priced Kit available Anywhere, Yet it Does the Job in
Industry, in Plants, Machine Shops and Everywhere Metal Marking is
needed. The Marker Unit is 10 volts, 2 amps and is Excellent
for Light Duty Marking of Tools and Parts. (Transformer is inside
marker unit)
KIT CONTAINS:
ETCH-O-MATIC marker with standard head marking size 7/8" x 13/4",
electrical cord, ground plate, 2 oz. Electrolyte solution in plastic
bottle, 10 special stencils, neutralizer, deep etching adapter clip
and complete instructions. Each kit will make approximately 1,000
marks before refill supplies are needed.
Unit is 110 Volts
standard, but is available in 220 volts for $20 more.
Industrial Price...$119.95
Only $79.95 ON SPECIAL TODAY!
Save $40.00
Today!
Only
$79.95 TODAY!
Etch-O-Matic Super Kit HEAVY DUTY... INDUSTRIAL
QUALITY
BEST VALUE ON THE MARKET TODAY!
NEW SUPER ETCH-O-MATIC is a Powerful, 15-Volt, 10-Amp, Heavy Duty,
Industrial Quality Marking System that can Stand Up to Continuous
Duty, Production Line Marking. It can make Fast A.C. Marks, then
Change Instantly to Deep Etch Marking Down to .003" Deep. It can
make Large Marks 2" x 4" or Larger
(with optional purchase of Medium or Large Grid Kits) for
Trademarks or Etch Hard-to-Mark Coatings like Black Oxide Quickly.
This is a Solid, "No Frills" Etcher that is Priced $200 to $300
BELOW Similar Kits on the Market Today.
KIT CONTAINS:
1 - 15-volt, 10-amp. marker unit with external transformer; adapter
clip for deep etch marking; ground plate; 8-oz. general purpose
electrolyte; 8-oz. neutralizer; extra pads; 100 pak special
stencils; complete instructions and packed in sturdy plastic
carrying case.
Unit is 110 Volts
standard, but is available in 220 volts for $20 more.
Industrial Price $299.95
Only $229.95 ON SPECIAL TODAY!
You SAVE
$70.00 Today!
Only $229.95 TODAY!
440 STENCIL MAKER KIT CONTENTS
1 UV Exposure
Unit in Aluminum Frame Measuring
5"x6"x12" High with Electric
Cord, Switch and Special 365
Nanometer Ultra-Violet Bulb (120
Watts)
1 Aluminum
Exposure Tray with Compression
Foam and Glass Top
1-16oz.
Bottle Stencil Developer
1 Plastic
Developing Tray with Lid
2 White
Developer Sponges
1 Digital
Timer
10 Unexposed
Universal Stencils 5"x6"
2 FREE
Samples of Universal Stencils
FOR PRACTICE
5 Sheets
Transparency Film For Your Copy
(8 1/2"x 11")
1 Sample
Glass Etching Kit with Etching
Cream
Complete
Instructions
****NOTE: 440 Stencil Maker is Only
Available In 110 Volt Configuration.****
****If You Use 220 Volts You Will Need a
Step Down Transformer.****
Regular Price $249.95
(You Save $80.00 TODAY) ONLY $169.95 TODAY!
ON SPECIAL TODAY
$169.95 We Do NOT Guarantee This Price Will Be
Available Tomorrow!
Today's SPECIAL PRICE...DON'T MISS IT!
Now You Can Combine
The Two Etch-O-Matic Kits Above With
The Mark 440 Stencil Maker Into A COMBO KIT Shown Below
And Receive Even Greater SPECIAL DISCOUNTS FOR TODAY! YOUR SAVINGS
TODAY ARE $140.00 TO $200.00
ON THE COMBO KITS! (Also You Will Qualify For The Special 20% Next Order
Discount!)
MARK 440 U.V.
STENCIL MAKER &
ETCH-O-MATIC STARTER KIT COMBO
Mark 440/Etch-O-Matic Starter
Kit Combo
$229.95
TODAY!
Please
Specify Laser or Inkjet
Transparency Sheets.
Kit Contains:Includes Everything in
MARK 440 UV Stencil Maker Kit PLUS
the Etch-O-Matic Starter Kit. You Save $100.00 On The Mark
440 And $50.00 On the Starter Kit for
A Total Savings Today Of $140.00
Off The Industrial Price and $20.00 Off Today's Sales Price
(Also,
You Will Get a 20%
Special Discount Coupon for
Savings On Your Very Next Order for Kits or Supplies.)
MARK 440 U.V.
STENCIL MAKER &
SUPER ETCH-O-MATIC KIT COMBO
Mark 440/Etch-O-Matic
Super Kit Combo
$349.95
TODAY!
Please
Specify Laser or Inkjet
Transparency Sheets.
Kit Contains:Includes
Everything in MARK 440 UV Stencil Maker Kit PLUS
the Super Etch-O-Matic Kit. You Save $100.00 On The Mark 440
And $50.00 On the Super Kit forTotal
Savings Today Of $200.00 Off The Industrial Price and $50.00
Off Today's Sales Price (Also, You Will Get a 20% Special Discount Coupon for
Savings On Your Very Next Order for Kits or Supplies.)
IMPORTANT NOTE: With Each Combo Kit ( Etch-O-Matic &
Stencil Maker Combined)
Purchased Today You Will Receive A 20% Discount Coupon
For Etch-O-Matic Kits Or Supplies ON YOUR VERY NEXT ORDER (NOT THIS
ORDER) We Do
NOT Guarantee This Offer Will Be Available Tomorrow!
DON'T MISS THIS SPECIAL OFFER TODAY!
Today's Special - 20% Coupon Included in
COMBO KITS
Good For Kits or Supplies on Your NEXT ORDER.
We Do NOT Guarantee This
Offer Will Be Available Tomorrow!
DON'T MISS IT!
Here Is
A
New Product Idea! Now Use Your
Metal Etching Stencils
Made For The Etch-O-Matic Above And
ETCH GLASS!
Here Is A Great New Idea That Lets You Use The
Stencils
You Make For Metal Etching...And Etch Almost Anything
Made Of Glass In Just Seconds. All You Do Is Create Your
Copy, Designs Or Artwork On YOUR Computer, Make A
Stencil (Like Above) And By Using Our New Glass Etching
Kits You Can Etch On Glass!
Would you like to be notified of special offers and new products? Would you like us to send you tips for expanding your etching business, or just more ways to enjoy your etching hobby? How about special members-only discounts? Try subscribing to our newsletter, and you'll get all these things and more.
